Tp100 Identificatore Di Coppie a Led **

Cordless
Telefoni BCA
Fax e multifunzione
Videosorveglianza professionale e IP

Wireless Hot Spot per Hotel
Access Point Wi-Fi

Registratori digitali multicanali
Doorphone IP & Analogici
Interfacce Citofoniche-Telefoniche
Voice Mail, IVR, voice Processing
Interfacce Gateway GSM-UMTS
Risponditori Analogici e ISDN

Studio di Registrazione Audio
Dispositivi telefonici di sicurezza
Interfacce e converter RS-232/LAN
Software gestione traffico telefonico

Centralini telefonici
Switch-Fax CTF20
Telefoni BCA

Ripetitori GSM/GPRS - UMTS

Cablaggio strutturato
Cablaggio fonia
Cablaggio strutturato Rame
Cablaggio Fibra Ottica

Apparati passivi per Cablaggio Strutturato
Apparati attivi per Cablaggio Strutturato

Armadi Rack 19"

Armadi rack 19'' assemblati

Apparati attivi Networking

Strumenti Fonia-Dati

Strumenti Fibra Ottica

Gruppi di continuita UPS

Cuffie professionali
Cuffie semiprofessionali
Accessori e ricambi per cuffie

Cuffie Wireless e Cuffie Wired
Cuffie Semipro
Accessori e ricambi per cuffie

Cuffie Professionali Wireless Wired PC
Accessori e ricambi per cuffie

Gateway VoIP analogici e ISDN, FXS-FXO

Routers - Firewall - VPN

Networking Wireless-Switch-PoE

Tele Audioconferenza Professionale

Videotelefoni e Telefoni IP

Apparecchi Telefonici IP SIP
Telefoni IP DECT GAP SIP
Audioconferenza IP

Telefoni IP

Telefoni ISDN

Telefoni di sicurezza GSM/GPS

Telefoni BCA
Protezioni telefoniche
Segreterie telefoniche

Telefoni Cordless Industriali a lungo raggio

Armadi rack 19'' da assemblare
Interfacce Citofoniche Universali
Videosorveglianza analogica e IP

Telefoni Industriali stagni e antideflagranti

Test-UM TP100 Tell-All Indicator

With the Test-Um TP100 Tell-All Indicator, just plug the supplied cable into any RJ jack that you've got questions about. The LEDs will light up to indicate which wire pairs are terminated indicated you've connected to a data jack. When you've connected to a phone jack, one LED will light. Very simple stuff.

Information On LED Status:

Terminator detected LEDs A LED will light for each pair that is terminated to a NIC or hub at the other end of the cable. Two or more LEDs being lit usually indicates a data network jack.

Voltage detected LEDs. One of the two LEDs will light to indicate presence of a DC voltage on the middle pair. The NORM LED will light if the polarity is correct for an analog phone line. The REV LED will light for the opposite polarity. Usually the jack is an analog or digital phone line if one of these LEDs lights. If both are on at once, the voltage is AC.

Labeling shows common terminator configurations for a few network standards. NIC's capable of a 100Mbits usually have all four pairs terminated.

View into RJ jack shows pin assignments. Horse shoe shapes above the connector outline shows pairing of DATA lines monitored for terminators. The single horse shoe in the middle of the connector outline is the pair monitored for voltage.

Comes with a patch cable.

Test-UM TP100 Tell-All Indicator

TP100 Features and Specifications:

Information On LED Status: